User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
39
Acquisition Commands
:ACQuire:AVERage ...................................................... 39
:ACQuire:MODe ......................................................... 39
:ACQuire<X>:MEMory? .............................................. 40
:ACQuire<X>:LMEMory? .............................................41
:ACQuire<X>:STATe? ...................................................41
:ACQuire:INTERpolation ............................................ 42
:ACQuire:FILTer .......................................................... 42
:ACQuire:RECOrdlength ............................................. 42
:HEADer ...................................................................... 43
:ACQuire:AVERage
Set
Query
Description
Selects or returns the number of waveform
acquisitions that are averaged in the average
acquisition mode.
Syntax
:ACQuire:AVERage {<NR1>| ?}
Related
Commands
:ACQuire:MODe
Parameter
<NR1>
2, 4, 8 ,16, 32, 64, 128, 256
Note
Before using this command, select the average
acquisition mode. See the example below.
Example
:ACQuire:MODe AVERage
:ACQuire:AVERage 2
Selects the average acquisition mode, and sets the
average number to 2.
:ACQuire:MODe
Set
Query
Description
Selects or returns the acquisition mode.
Syntax
:ACQuire:MODe {SAMPle | PDETect | AVERage | ?}