User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
41
:ACQuire<X>:LMEMory?
Query
Description
Returns the data in acquisition memory for the
selected channel as a header + raw data. This is
the equivalent to the Detail LM format.
Syntax
:ACQuire<X>:LMEMory?
Related
Commands
:ACQuire:RECOrdlength
:HEADer
Parameter
<X>
Channel number (1 to 4)
Example
:ACQuire1:LMEMory?
Format,2.0A,Memory
Length,1000000,IntpDistance,0,Trigger
Address,2499,Trigger Level,9.400E-
02,Source,CH1,Vertical Units,V,Vertical Units
Div,0,Vertical Units Extend Div,13,Label,;Probe
Type,0,Probe,1.000E+00,Vertical Scale,5.000E-02,Vertical
Position,-9.400E-02,Horizontal Units,S,Horizontal
Scale,2.000E-04,Horizontal
Position,0.000E+00,Horizontal Mode,Main,SincET
Mode,Real Time,Sampling Period,2.000E-09,Horizontal
Old Scale,2.000E-04,Horizontal Old
Position,0.000E+00,Firmware,V0.99.03,Time,19-Sep-12
10:40:10,Waveform Data; #72000000 <Raw Data> <LF>
:ACQuire<X>:STATe?
Query
Description
Returns the status of waveform data.
Syntax
:ACQuire<X>:STATe?
Parameter
<X>
Channel number (1 to 4)
Return parameter
0
Raw data is not ready
1
Raw data is ready