User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
108
Example
:REF1:OFFSet -5.000E-2
Selects reference 1, and then sets the vertical
position to -50mV/mA.
:REF<x>:SCALe
Set
Query
Description
Sets or returns the selected reference waveform
vertical scale.
Syntax
:REF<x>:SCALe { <NRf> | ?}
Related
commands
:REF<X>:DISPlay
Parameter
<X>
Reference waveform 1, 2, 3 ,4.
<NRf>
Vertical scale
Return parameter
<NR3>
Returns the reference waveform vertical
scale.
Example
:REF1:SCALe 5.000E-2
Selects reference 1, and then sets the vertical scale
to 50mV|mA/div.