User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
111
Timebase Commands
:TIMebase:POSition .................................................. 111
:TIMebase:SCALe ....................................................... 111
:TIMebase:MODe ...................................................... 111
:TIMebase:WINDow:POSition ..................................112
:TIMebase:WINDow:SCALe ......................................112
:TIMebase:POSition
Set
Query
Description
Sets or queries the horizontal position.
Syntax
:TIMebase:POSition {<NRf> | ?}
Parameter
<NRf>
Horizontal position
Return parameter
<NR3>
Returns the horizontal position.
Example
:TIMebase:POSition 5.00E-4
Sets the horizontal position as 500us.
:TIMebase:SCALe
Set
Query
Description
Sets or queries the horizontal scale.
Syntax
:TIMebase:SCALe {<NRf> | ?}
Parameter
<NRf>
Horizontal scale
Return parameter
<NR3>
Returns the horizontal scale.
Example
:TIMebase:SCALe 5.00E-2
Sets the horizontal scale to 50ms/div.
:TIMebase:MODe
Set
Query
Description
Sets or queries the time base mode. The time base
mode determines the display view window on the
scope.