User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
126
:TRIGger:VIDeo:TYPe
Set
Query
Description
Sets or queries the video trigger type.
Syntax
:TRIGger:VIDeo:TYPE {NTSC | PAL | SECam | ?}
Related
commands
:TRIGger:TYPe
Parameter
NTSC
NTSC
PAL
PAL
SECam
SECAM
Return parameter
Returns the video trigger type.
Example
:TRIGger:VIDeo:TYPe NTSC
Sets the video trigger to NTSC.
:TRIGger:VIDeo:FIELd
Set
Query
Description
Sets or queries the video trigger field.
Syntax
:TRIGger:VIDeo:FIELd { FIELD1 | FIELD2 | ALLFields |
ALLLines | ? }
Related
commands
:TRIGger:TYPe
Parameter
FIELD1
Trigger on field 1
FIELD2
Trigger on field 2
ALLFields
Trigger on all fields
ALLLines
Trigger on all lines
Return parameter
Returns the video trigger field.
Example
:TRIGger:VIDeo:FIELd ALLFields
Sets the video trigger to trigger on all fields.