User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
142
Related
commands
:TRIGger:LOGic:INPut:CLOCK:SOURce
:TRIGger:LOGic:INPut:CLOCK:EDGe
Parameter/Return
parameter
NONe
No clock source, Set to pattern (data)
trigger.
D0 to D15
Digital channels D0 to D15
Example1
:TRIGger:LOGic:INPut:CLOCK:SOURce D0
:TRIGger:LOGic:INPut:CLOCK:EDGe FALL
:TRIGger:LOGic:PATtern
Query
Description
Returns the conditions that are used to generate a
logic pattern trigger with respect to the defined
input pattern and identifies the time at which the
selected pattern may be true and still generate a
trigger.
Syntax
:TRIGger:LOGic:PATtern?
Return parameter
Returns a string containing the conditions for a
logic pattern trigger.
Example
:TRIGger:LOGic:PATtern?
:TRIGGER:LOGIC:PATTERN:INPUT:D0 X;D1
X;D2 X;D3 X;D4 X;D5 X;D6 X;D7 X;D8 X;D9 X;
D10 X;D11 X;D12 X;D13 X;D14 X;D15
X;:TRIGGER:LOGIC:PATTERN:WHEN
TRUE; :TRIGGER:LOGIC:PATTERN:DELTATIME
1.000e-08;
:TRIGger:LOGic:PATtern:INPut:D<X>
Set
Query
Description
Sets or queries the trigger logic for the selected
digital input.
Syntax
:TRIGger:LOGic:PATtern:INPut:D<X> { HIGH | LOW |
X | ? }
Related
commands
:TRIGger:LOGic:INPut:CLOCK:SOURce
:TRIGger:LOGic:INPut:CLOCK:EDGe