User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
144
LESSTHAN
Set less than mode
Is True < time period*
*Set from
:TRIGger:LOGic:PATtern:DELTatime
MORETHAN
Set less than mode
Is True > time period*
*Set from
:TRIGger:LOGic:PATtern:DELTatime
EQUAL
Set less than mode
Is True = time period*
*Set from
TRIGger:LOGic:PATtern:DELTatime
UNEQUAL
Set less than mode
Is True ≠ time period*
*Set from
TRIGger:LOGic:PATtern:DELTatime
Example1
:TRIGger:LOGic:PATtern:WHEn FALSE
Set the logic to false.
Example2
:TRIGger:LOGic:PATtern:WHEn?
FALSE
:TRIGger:TIMEOut:WHEn
Set
Query
Description
Sets or queries the timeout trigger condition.
Syntax
:TRIGger:TIMEOut:WHEn {HIGH|LOW|EITher|?}
Related
commands
:TRIGger:TIMEOut:TIMER
Parameter
HIGH
Signal is high.
LOW
Signal is low.
EITher
Signal is high or low.
Return parameter
Returns the timeout condition (HIGH, LOW, EITHER).