User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
172
Example1
:SEARCH:TRIGger:LEVel TTL
Sets the search trigger level to TTL.
Example2
:SEARCH:TRIGger:LEVel 3.30E-1
Sets the search trigger level to 330mV/mA.
:SEARCH:TRIGger:HLEVel
Set
Query
Description
Sets or queries the high level search trigger.
Note
Applicable for Rise and Fall/Pulse Runt search
triggers.
Syntax
:SEARCH:TRIGger:HLEVel {TTL | ECL | <NRf> | ?}
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
<NRf>
High level value.
TTL
Sets the high level search trigger to
TTL.
ECL
Sets the high level search trigger to
ECL.
Return parameter
<NR3>
Returns the high level search trigger.
Example1
:SEARCH:TRIGger:HLEVel TTL
Sets the high level search trigger to TTL
Example2
:SEARCH:TRIGger:HLEVel 3.30E-1
Sets the high level search trigger to 330mV/mA.
:SEARCH:TRIGger:LLEVel
Set
Query
Description
Sets or queries the low level search trigger.
Note
Applicable for Rise and Fall/Pulse Runt triggers.
Syntax
:SEARCH:TRIGger:LLEVel {TTL | ECL | <NRf> | ?}
Related
commands
:SEARCH:TRIGger:TYPe