User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
176
Equal
=
UNEQual
≠
Return parameter
Returns the pulse runt search trigger conditions.
Example
:SEARCH:TRIGger:RUNT:WHEn UNEQual
Sets the pulse runt search trigger condition to
unequal (≠).
:SEARCH:TRIGger:RUNT:TIMe
Set
Query
Description
Sets or queries the pulse runt search trigger time.
Syntax
:SEARCH:TRIGger:RUNT:TIMe {<NRf> | ? }
Related
commands
:SEARCH:TRIGger:TYPe
:SEARCH:TRIGger:RUNT:WHEn
Parameter
<NRf>
Pulse runt time (4nS to 10S)
Return Parameter
<NR3>
Returns the runt time in seconds.
Example
:SEARCH:TRIGger:RUNT:TIMe 4.00E-5
Sets the pulse runt time to 40.0uS.
:SEARCH:TRIGger:RISEFall:WHEn
Set
Query
Description
Sets or queries the rise and fall search trigger
conditions.
Syntax
:SEARCH:TRIGger:RISEFall:WHEn {THAN | LESSthan
| EQual | UNEQual |? }
Related
commands
:SEARCH:TRIGger:TYPe
:SEARCH:TRIGger:RISEFall:TIMe
Parameter
THAN
>
LESSthan
<
Equal
=
UNEQual
≠
Return parameter
Returns the rise and fall search trigger condition.