User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
193
:D<X>:DISPlay
Set
Query
Description
Turns the selected digital channel on or off or
queries its status.
Syntax
:D<X>:DISPlay { OFF | ON | ? }
Parameter/
Return parameter
<X>
Digital channel number D(0 to 15).
OFF
Turns the selected digital channel off.
ON
Turns the selected digital channel on.
Example
:D0:DISPlay ON
Turns D0 on.
:D<X>:POSition
Set
Query
Description
Sets or returns the position of the selected digital
channel.
Syntax
:D<X>:POSition { <NRf> | ? }
Parameter
<X>
Digital channel number D(0 to 15).
<NRf>
Position
Return parameter
<NR3>
Returns the position of the selected
digital channel.
Example1
:D0:POSition?
-1.87 DIV
Example2
:D0:POSition 0
Sets the position to 0 DIV.
:DISPlay:DIGital:HEIght
Set
Query
Description
Sets or queries the height of the digital channel
waveforms.
Syntax
:DISPlay:DIGital:HEIght {SMAll | MEDium | LARge | ?}