User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
196
Syntax
D<X>:MEMory?
Related
commands
ACQuire:RECOrdlength
:HEADer
Parameter
<X>
Digital channel D0 to D15
Return parameter
Returns the raw data + header information for the
selected channel in the following format:
Format,2.0A,Display,1,Memory
Length,5000,IntpDistance,0,Trigger
Address,2500,Threshold
Used,1.400E+00,Source,D2,Vertical
Units,V,Label2,;Firmware,V0.99.03,Horizontal
Units,S,Horizontal Scale,5.000E-04,Horizontal
Position,0.000E+00,Horizontal Mode,Main,SincET
Mode,Real Time,Sampling Period,1.000E-
06,Time,25-Sep-12 16:13:41,Waveform
Data;#510000<Raw Data> <LF>
:D<x>:LMEMory
Query
Description
Returns the data in acquisition memory for the
selected digital channel as a header + raw data.
Note
The data from this command is equivalent to the
data that is saved in the LM Detail format using
the scope panel controls.
Syntax
D<X>:LMEMory?
Related
commands
ACQuire:RECOrdlength
:HEADer
Parameter
<X>
Digital channel D0 to D15