User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
206
Example
:DIGital:ANAlog:A1:LABel "A1"
:DIGital:ANAlog:A1:LABel:DISPlay ON
:DIGital:ANAlog:A1:LABel:DISPlay?
ON
Sets the label for analog waveform 1 to "A1" and
then turns the label display on. The query return
shows that the label is on.
:SET<X>:LABel
Set
Query
Description
Sets or returns the file label for the selected setup.
Syntax
:SET<X>:LABel {<string> | ?}
Related
commands
:SET<X>:LABel:DISPlay
Parameter
<X>
Setup number 1 to 20
<string>
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, "string".
Return parameter
<string>
Returns the label for the selected
setup. No return indicates that there
has not been a file label assigned for
the selected setup.
Example1
:SET1:LABel "SET1_lab"
Sets the label for setup 1 as "SET1_lab".
Example2
:SET1:LABel?
SET1_lab