User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
37
0.00V;:TRIGger:HLEVel 0.00V;:TRIGger:LLEVel
0.00V;:TRIGger:PULSEWidth:POLarity
POSITIVE;:TRIGger:RUNT:POLarity
POSITIVE;:TRIGger:RISEFall:SLOP RISE;:TRIGger:PULSe:WHEn
THAN;:TRIGger:PULSe:TIMe 8.000e-08;:TRIGger:RUNT:WHEn
THAN;:TRIGger:RUNT:TIMe 8.000e-08;:TRIGger:RISEFall:WHEn
THAN;:TRIGger:RISEFall:TIMe 8.000e-
08;:SEARCH:TRIGGER:LOGIC:INPut:CLOCK:EDGe RISE;SOURce
NONE;:SEARCH:TRIGGER:LOGIC:PATTERM:INPUT::SEARCH:TRIG
GER:LOGIC:PATTERM:WHEN
TRUE;:TRIGGER:LOGIC:PATTERM:DELTATIME 1.000e-
08;:TRIGger:BUS:TYPe PARALLEL;:TRIGger:BUS:B1:PARallel:VALue
XXXXXXXX;:B1:I2C:ADDRess:VALue XXXXXXX;:CONDition
START;:ADDRess:DIRection WRITE;:DATa:SIZe 1;:DATa:VALue
XXXXXXXX;:UART:CONDition TXSTART;:RX:DATa:SIZe
1;:RX:DATa:VALue XXXXXXXX;:TX:DATa:SIZe 1;:TX:DATa:VALue
XXXXXXXX;:SPI:CONDition SS;:DATa:SIZe 1;:DATa:MISO:VALue
XXXX;:DATa:MOSI:VALue
XXXX;:CHANnel1:LABel ;:CHANnel2:LABel ;:CHANnel3:LABel ;:CH
ANnel4:LABel ;:REF1:LABel ;:REF2:LABel ;:REF3:LABel ;:REF4:LABel
;:SET1:LABel ;:SET2:LABel ;:SET3:LABel ;:SET4:LABel ;:SET5:LABel ;:
SET6:LABel ;:SET7:LABel ;:SET8:LABel ;:SET9:LABel ;:SET10:LABel ;:
SET11:LABel ;:SET12:LABel ;:SET13:LABel ;:SET14:LABel ;:SET15:LA
Bel ;:SET16:LABel ;:SET17:LABel ;:SET18:LABel ;:SET19:LABel ;:SET2
0:LABel ;:BUS1:LABel ;:D0:LABel ;:D1:LABel ;:D2:LABel ;:D3:LABel ;:
D4:LABel ;:D5:LABel ;:D6:LABel ;:D7:LABel ;:D8:LABel ;:D9:LABel ;:
D10:LABel ;:D11:LABel ;:D12:LABel ;:D13:LABel ;:D14:LABel ;:D15:L
ABel ;:CHANnel1:LABel:DISPlay OFF;:CHANnel2:LABel:DISPlay
OFF;:CHANnel3:LABel:DISPlay OFF;:CHANnel4:LABel:DISPlay
OFF;:REF0:LABel:DISPlay OFF;:REF1:LABel:DISPlay
OFF;:REF2:LABel:DISPlay OFF;:REF3:LABel:DISPlay
OFF;:BUS1:LABel:DISPlay OFF;:D0:LABel:DISPlay
OFF;:D1:LABel:DISPlay OFF;:D2:LABel:DISPlay
OFF;:D3:LABel:DISPlay OFF;:D4:LABel:DISPlay
OFF;:D5:LABel:DISPlay OFF;:D6:LABel:DISPlay
OFF;:D7:LABel:DISPlay OFF;:D8:LABel:DISPlay
OFF;:D9:LABel:DISPlay OFF;:D10:LABel:DISPlay
OFF;:D11:LABel:DISPlay OFF;:D12:LABel:DISPlay
OFF;:D13:LABel:DISPlay OFF;:D14:LABel:DISPlay
OFF;:D15:LABel:DISPlay OFF;:BUZZER OFF
*SAV
Set
Description
Saves the current panel settings to the selected
memory number.
Syntax
*SAV {1 | 2 | 3 |…. | 20}