Datasheet

GDS-2000A Series User Manual
196
Save Image
Images can be saved either using the Save/Recall key or by using
the Hardcopy key. To save images using the Hardcopy key, see the
hardcopy section on page 218.
Panel Operation
1. To save to USB, connect a
USB drive to the front or
rear panel USB port. If a
USB drive is not connected,
images will be saved to the
internal memory.
Front
Rear
Host
Note
Only one host connection, front or rear, is allowed at a
time.
The USB Device port on the rear panel cannot be used
concurrently with the USB Host port on the rear panel.
Operation
2. Press the Save/Recall key from the
front panel.
Save/Recall
3. Pres Save Image from the bottom
menu.
4. Press File Format to choose PNG or
BMP file types.
Range
DSxxxx.bmp, DSxxxx.png
5. Press Ink Saver to toggle Ink Saver
On or Off.