Datasheet

GDS-2000A Series User Manual
220
Save - Hardcopy Key
Background
When the Hardcopy key is assigned to “Save”,
pressing the Hardcopy key can be used to save a
screen shot, a waveform, or the current setup,
depending on the configuration.
Panel Operation
1. If you wish to save to USB,
connect a USB drive to the
front or rear panel USB port,
otherwise the file will save
to internal memory.
Front
Rear
Host
Note
Only one host connection, front or rear, is allowed at a
time.
The USB Device port on the rear panel cannot be used
concurrently with the USB Host port on the rear panel.
2. Press the Utility key.
Utility
3. Press Hardcopy from the bottom
menu.
4. On the side menu, press Function
to select Save.
5. Press Assign Save To and select
which type of file will be saved
when the Hardcopy key is pressed.
File Type:
Image, Waveform, Setup, All