Datasheet

GDS-2000A Series User Manual
24
Rear Panel
LINE VOLTAGE
AC 100 240V
RANGE
FREQUENCY 50 60Hz
POWER MAX. 55W 80VA
CAUTION
TO AVOID ELECTRIC SHOCK THE POWER CORD PROTECTIVE GROUNDING
DO NOT REMOVE COVERS. REFER SERVICING TO QUALIFIED PERSONNEL.
CONDUCTOR MUST BE CONNECTED TO GROUND.
Ser. No. Label
Calibration
output
RS232
port Module Slot 1
Module
Slot 2
Key lock Power input
socket
Ground strap
connector
Go/No Go
output
USB Host
port
USB Device
port
Calibration
Output
Outputs the signal for vertical scale
accuracy calibration (page 243).
USB Device Port
The USB Device port is used for
remote control.
USB Host Port
The USB Host port is used to data
transfer.
Note: Only one rear panel USB port
can be used at a time. Inserting a USB
flash drive into the USB Host Port will
disable the USB Device Port, and vice
versa.