Datasheet

GSP-9330
Simply Reliable
GSP-9330
TESTS MUST BE FAST!
Fastest Sweep Speed Up to 204 sm
Modulation Signal Analysis
and Processing
GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 s sweep speed. Users,
via high speed sweep time, can easily handle and analyze modulation signals. The keys to handling modulated signals
are fast sweep time and signal demodulation functions. In addition to the analog AM/FM demodulation and analysis
function, GSP-9330 also provides digital signal ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays,
EMC issues are very crucial to product's design processes. Therefore, GSP-9330 has incorporated the EMC pretest
solution to facilitate EMC tests. The simple and easy EMC pretest procedures from GSP-9330 can tremendously
shorten users' product launch timebline.
m
For measuring signals, speed is one of the specifications to be considered. Perhaps, it is the most
important specification. GSP-9330 provides sweep speed up to 204 s. Users, via high speed sweep
time, can easily capture transient signals such as frequency/amplitude modulation signals, Blue
tooth frequency hopping signals, tuned oscillator or other interfering signals under ISM Band.
m
The keys to handling modulated signals are fast sweep time and
signal demodulation function. In addition to the analog AM/FM
demodulation and analysis function, GSP-9330 also provides
ASK/FSK digital signal demodulation capability. For the widely-
utilized, low-cost and low power consumption 2FSK modulation
signals, GSP-9330 also provides the complete test and analysis
function to address the requirements.
EMC Pretest Solution
GSP-9330 can meet customers' EMC pretest requirements on the product development and
verification stages. Users can detect and resolve problems at the early product development stage
that can save time and money for product development and verification fee. As a result, users can
expedite the process of products launch. GSP-9330 has the built-in EMI dedicated 200/9k/120k/
1MHz filter, 20 dB low noise amplifier and Quasi-Peak/Average detection mode to conduct
radiation and conduction tests after collocating with the probe set. GKT-008, the radiation test
probe set, provides a complete near field test probe set to simplify the complex measurement
procedures and to simulate 3m/10m far field tests from the labs. Using GKT-008 can greatly save
engineers' debugging time and the money for going back and forth
to the labs. GKT-008 can collocate with the Tracking Generator
function of GSP-9330 to conduct EMS pretests. For conduction
tests, GKT-008 can collocate with LISN and Isolated Transformer
to conduct electromagnetic conduction tests. If users concern
EUT's large voltage variation or complexity, applying a Transient
Limiter will make test equipment safer.
LXI
3.25GHz SPECTRUM ANALYZER

Summary of content (4 pages)