User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
102
:PROGram:STEP
Set
Query
Description
Sets or queries the step number for the program
sequence.
Syntax
:PROGram:STEP {<NR1>}
Query Syntax
:PROGram:STEP?
Parameter
<NR1>
(1~16) step number
Return Parameter
<string>
Step:<NR1>
Example
:PROGram:STEP 1
Sets the step number to 1.
Query example
:PROGram:STEP?
>Step:1
Returns the step number (1).
:PROGram:MEMory
Set
Query
Description
Sets or queries the memory number for the
program sequence.
Syntax
:PROGram:MEMory{<NR1>}
Query Syntax
:PROGram:MEMory?
Parameter
<NR1>
(1~256) memory number
Return Parameter
<string>
Memory:M <NR1>
Example
:PROGram:MEMory 1
Sets the memory number to 1.
Query example
:PROGram:MEMory?
>Memory:M 1
Returns the memory number (1).
:PROGram:RUN
Set
Query
Description
Sets or queries the “Run” state for the selected
program step in the program sequence.