User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
108
:PROGram:SAVE
Set
Description
Saves the program chain.
Syntax
:PROGram:SAVE
Example
:PROG:SAVE
:NSEQuence:STATe
Set
Query
Description
Sets or queries the state of the Normal Sequence
function.
Syntax
:NSEQuence:STATe
{OFF|ON|PAUSe|CONTinue|NEXT}
Query Syntax
:NSEQuence:STATe? {ON,STOP|RUN|PAUSe}|OFF
Parameter
OFF
Normal sequence Off
ON
Normal sequence On
PAUSe
Pause sequence
CONTinue
Continue sequence
NEXT
Go to next sequence
Return Parameter
ON,STOP
Sequence has stopped
ON, RUN
Sequence is running
ON, PAUSE
Sequence is paused
OFF
Sequence is off
Example
:NSEQuence:STATe ON
Turns “Normal Sequence” on.
Query example
:NSEQuence:STATe?
>OFF
“Normal Sequence” is off.