User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
115
Return Parameter
<string>
Returns the next sequence in the
chain in the following format:
Chain:<NR1>|OFF
Example
:NSEQuence:CHAin 2
Sets the next sequence in the chain as S02.
Query example
:NSEQuence:CHAin?
>Chain: 2
Returns the next sequence in the chain (S02).
:NSEQuence:EDIT
Set
Query
Description
Configures the parameters for the Data Edit for
Normal Sequence menu, equivalent to entering the
FUNC>Sequence>Normal Sequence>Data Edit
menu.
Syntax
:NSEQuence:EDIT
{<NR1>,<NR1>,<NR2>,<NR1>,<NR1>,<NR1>,<NR1>
,<bool>|OFF|ON,<bool>|OFF|ON,<bool>|OFF|ON,
<bool>|OFF|ON}
Query Syntax
:NSEQuence:EDIT?
Related
Commands
:NSEQuence:
Parameter
Parameters in order:
Description
<NR1>
Current step number
<NR1>
Total number of steps
<NR2>
Value
<NR1>
Time: hours
<NR1>
Time: minutes
<NR1>
Time: seconds
<NR1>
Time: milliseconds
<bool>|OFF|ON
LOAD setting
<bool>|OFF|ON
TRIG OUT setting
<bool>|OFF|ON
RAMP setting
<bool>|OFF|ON
PAUSE setting