User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
44
Query Syntax
[:CONFigure]:OVP?
Parameter
<NRf>[V]
voltage limit value.
MINIMUM or MIN
MINIMUM value.
MAXIMUM or MAX
MAXIMUM value.
Return parameter
Returns the OVP level (<NR2>).
Example1
:OVP 10.00
Sets the OVP setting to 10V.
Query example
:OVP?
> 10.0000
The OVP setting is 10.0000V.
[:CONFigure]:SSTart
Set
Query
Description
Sets or queries the Soft Start time setting.
Syntax
[:CONFigure]:SSTart {<NRf>[s] | MINimum|
MAXimum | OFF }
Query Syntax
[:CONFigure]:SSTart?
Parameter
<NRf>[s]
The soft start time in
seconds.
MINIMUM or MIN
Minimum time = 0 second
MAXIMUM or MAX
Maximum time
OFF
OFF = 0 second
Return parameter
<NR2>
Returns the soft start time
in seconds.
OFF
Off
Example
:SSTart OFF
Turns the soft start function off.
Query example
:SSTart?
>OFF
The soft start function is off.