User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
56
Step Resolution Commands
[:CONFigure]:STEP:CCH ................................................... 56
[:CONFigure]:STEP:CCM .................................................. 57
[:CONFigure]:STEP:CCL .................................................... 57
[:CONFigure]:STEP:CC ...................................................... 58
[:CONFigure]:STEP:CRH ................................................... 58
[:CONFigure]:STEP:CRM .................................................. 59
[:CONFigure]:STEP:CRL .................................................... 60
[:CONFigure]:STEP:CR ...................................................... 60
[:CONFigure]:STEP:CVH................................................... 61
[:CONFigure]:STEP:CVL ................................................... 61
[:CONFigure]:STEP:CV ...................................................... 62
[:CONFigure]:STEP:CPH ................................................... 62
[:CONFigure]:STEP:CPM ................................................... 63
[:CONFigure]:STEP:CPL .................................................... 63
[:CONFigure]:STEP:CP ...................................................... 64
[:CONFigure]:STEP:CCH
Set
Query
Description
Configures the step resolution for CC High Range.
Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CCH {<NRf>[ A ] | MINimum |
MAXimum }
Query Syntax
[:CONFigure]:STEP:CCH?
Parameter
<NRf>[ A ]
Step resolution.
MINIMUM or MIN
Minimum step resolution
MAXIMUM or MAX
Maximum step resolution
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CCH 0.002A
Sets the step resolution to 0.002A.