User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
59
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CRH 0.8
Sets the step resolution to 0.8℧.
Query example
:STEP:CRH?
>CRH:0.8
Returns the step resolution (0.8℧).
[:CONFigure]:STEP:CRM
Set
Query
Description
Configures the step resolution for CR Medium
Range. Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CRM {<NRf>[ MHO ] | MINimum
| MAXimum }
Query Syntax
[:CONFigure]:STEP:CRM?
Parameter
<NRf>[ MHO ]
Step resolution. [MHO]
MINIMUM or MIN
Minimum step resolution
MAXIMUM or MAX
Maximum step resolution
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CRM 0.08
Sets the step resolution to 0.08℧.
Query example
:STEP:CRM?
>CRM:0.08
Returns the step resolution (0.08℧).