User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
62
Example
:STEP:CVL 0.001V
Sets the step resolution to 0.001V.
Query example
:STEP:CVL?
> CVH:0.001
Returns the step resolution (0.001V).
[:CONFigure]:STEP:CV
Set
Query
Description
Returns the step resolution for each CV Mode
range as a string.
Query Syntax
[:CONFigure]:STEP:CV?
Return parameter
<ASCII string>
Returns the CVH and CVL
step resolution settings.
Query example
:STEP:CV?
>CVH:0.01, CVL:0.001
Returns the CV mode step resolution for each range.
[:CONFigure]:STEP:CPH
Set
Query
Description
Configures the step resolution for CP High Range.
Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CPH {<NRf>[ W ] | MINimum |
MAXimum }
Query Syntax
[:CONFigure]:STEP:CPH?
Parameter
<NRf>[ W ]
Step resolution.
MINIMUM or MIN
Minimum step resolution
MAXIMUM or MAX
Maximum step resolution
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CPH 0.01
Sets the step resolution to 0.01W.