User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
105
Syntax
:PROGram:STIMe {<NR2>[s]|OFF}
Query Syntax
:PROGram:STIMe?
Parameter
<NR2>[s]
(0~On-Time) (in seconds)
OFF
Turns the Short-Time off.
Return Parameter
<string>
Short-Time:<NR2>
Example
:PROGram:STIMe 1
Sets the Short-Time to 1 second.
Query example
:PROGram:STIMe?
>Short-Time:1.0
Returns the Short-Time (1 second).
[:PROGram]:CHAin:STARt
Set
Query
Description
Sets or queries the first program number for the
chain.
Syntax
[:PROGram]:CHAin:STARt {<NR1>}
Query Syntax
[:PROGram]:CHAin:STARt?
Parameter
<NR1>
(1~16) Program number
Return Parameter
<string>
P1 ~ P16
Example
:CHAin:STARt 1
Sets program 1 as the start of the program chain.
Query example
:CHAin:STARt?
>P1
Returns the program number that starts the chain.
[:PROGram]:CHAin
Set
Query
Description
Sets or queries which programs are added to
program chain and the order of those programs in
the program chain.