User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
106
Syntax
[:PROGram]:CHAin
{<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF}
Query Syntax
[:PROGram]:CHAin?
Parameter
Parameters in
order:
Description
<NR1>|OFF
(1~16) Program no. that follows P01.
<NR1>|OFF
(1~16) Program no. that follows P02.
<NR1>|OFF
(1~16) Program no. that follows P03.
<NR1>|OFF
(1~16) Program no. that follows P04.
<NR1>|OFF
(1~16) Program no. that follows P05.
<NR1>|OFF
(1~16) Program no. that follows P06.
<NR1>|OFF
(1~16) Program no. that follows P07.
<NR1>|OFF
(1~16) Program no. that follows P08.
<NR1>|OFF
(1~16) Program no. that follows P09.
<NR1>|OFF
(1~16) Program no. that follows P10.
<NR1>|OFF
(1~16) Program no. that follows P11.
<NR1>|OFF
(1~16) Program no. that follows P12.
<NR1>|OFF
(1~16) Program no. that follows P13.
<NR1>|OFF
(1~16) Program no. that follows P14.
<NR1>|OFF
(1~16) Program no. that follows P15.
<NR1>|OFF
(1~16) Program no. that follows P16.
Return Parameter
<string>
P1->XX;P2->XX;P3->XX;P4->XX;
P5->XX;P6->XX;P7->XX;P8->XX;
P9->XX;P10->XX;P11->XX;P12->XX;
P13->XX;P14->XX;P15->XX;P16->XX
Where XX = P1 ~ P16 or OFF
Example
:CHAin 4,OFF,OFF,5,6,OFF,OFF,OFF,OFF,OFF,OFF,
OFF,OFF, OFF,OFF,OFF
Configures the program chain as follows:
P01→P04→P05→P06→OFF