User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
113
Example
:NSEQuence:RANGe IHVL
Sets the range to IHVL.
Query example
:NSEQuence:RANGe?
>Range: IHVL
Returns the range.
:NSEQuence:LOOP
Set
Query
Description
Sets or queries the number of loops for the
sequence.
Syntax
:NSEQuence:LOOP {<NR1>|INFinity}
Query Syntax
:NSEQuence:LOOP?
Parameter
<NR1>
(1~9999)Sets the number of loops
INFinity
Sets the number of loops to infinite.
Return Parameter
<string>
Returns the number of loops in the
following format:
Loop: <NR1>|Infinity
Example
:NSEQuence:LOOP 1
Sets the number of loops to 1.
Query example
:NSEQuence:LOOP?
>Loop: 1
Returns the number of loops(1).
:NSEQuence:LLOad
Set
Query
Description
Sets or queries the Last Load state.
Syntax
:NSEQuence:LLOad {<bool>|ON|OFF}
Query Syntax
:NSEQuence:LLOad?
Parameter
ON, 1
Turns Last Load on.
OFF, 0
Turns Last Load off.
Return Parameter
<string>
Returns the Last Load state in the
following format:
Last Load:ON|OFF