User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
114
Example
:NSEQuence:LLOad ON
Turns Last Load on.
Query example
:NSEQuence:LLOad?
>Last Load: ON
Returns the last load state.
:NSEQuence:LAST
Set
Query
Description
Sets or queries the value of Last Load when Last
Load = ON. The unit depends on the Mode.
Syntax
:NSEQuence:LAST{<NR2>}
Query Syntax
:NSEQuence:LAST?
Parameter
<NR2>
current value(CC), resistance
value(CR), voltage value(CV), power
value(CP).
Return Parameter
<string>
Returns the value for the Last Load
in the following format:
Last:<NR2>
Example
:NSEQuence:LAST 1.000
Sets the value of Last Load to 1.000.
Query example
:NSEQuence:LAST?
>Last: 1.000
Returns the value of Last Load.
:NSEQuence:CHAin
Set
Query
Description
Sets or queries the next sequence in the chain.
Syntax
:NSEQuence:CHAin {<NR1>|OFF}
Query Syntax
:NSEQuence:CHAin?
Parameter
<NR1>
The sequence number of the next
sequence in the chain.
OFF
End the chain at the current
sequence.