User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
123
:FSEQuence:RPTStep
Set
Query
Description
Sets or queries the last step number per loop.
Syntax
:FSEQuence:RPTStep {<NR1>}
Query Syntax
:FSEQuence:RPTStep?
Parameter
<NR1>
1~1000
Return Parameter
<string>
RPTSTEP:<NR1>
Example
:FSEQuence:RPTStep 11
Sets the RPTSTEP to 11.
Query example
:FSEQuence:RPTStep?
> RPTSTEP: 11
Returns the RPTSTEP number.
:FSEQuence:EDIT
Set
Query
Description
Configures the parameters for the Data Edit for
Fast Sequence menu, equivalent to entering the
FUNC>Sequence>Fast Sequence>Edit Sequence
menu.
Syntax
:FSEQuence:EDIT
{<NR1>,<NR1>,<NR2>,<bool>|OFF|ON}
Query Syntax
:FSEQuence:EDIT?
Related
Commands
:FSEQuence: