User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
135
:UTILity:CONTrast
Set
Query
Description
Sets or queries the display contrast level.
Syntax
:UTILity:CONTrast {NR1}
Query Syntax
:UTILity:CONTrast?
Parameter/
Return Parameter
<NR1>
3~13 (low ~ high)
Example
:UTILity:CONTrast 8
Sets the contrast to 8.
Query Example
:UTILity:CONTrast?
>8
:UTILity:BRIGhtness
Set
Query
Description
Sets or queries the display contrast level.
Syntax
:UTILity:BRIGhtness {NR1}
Query Syntax
:UTILity:BRIGhtness?
Parameter/
Return Parameter
<NR1>
50~90 (low ~ high)
Example
:UTILity:BRIGhtness 70
Sets the contrast to 70.
Query Example
:UTILity:BRIGhtness?
>70
:UTILity:LANGuage
Set
Query
Description
Sets or queries the language. Note: English is the
only available language.
Syntax
:UTILity:LANGuage {ENGLish}
Query Syntax
:UTILity:LANGuage?