User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
138
:PRESet:SAVE
Set
Description
Saves Preset Data to internal memory to one of 9
slots.
Syntax
:PRESet:SAVE {<NR1>}
Parameter
<NR1>
P1 ~ P9
Example
:PRESet:SAVE 1
Save Preset Data to P1.
:PRESet:RECall
Set
Description
Recalls Preset Data from internal memory to one of
9 slots.
Syntax
:PRESet:RECall {<NR1>}
Parameter
<NR1>
P1 ~ P9
Example
:PRESet:RECall 1
Recall Preset Data from P1.
:SETup:SAVE
Set
Description
Saves Setup Data to internal memory to one of 100
slots.
Syntax
:SETup:SAVE {<NR1>}
Parameter
<NR1>
S001 ~ S100
Example
:SETup:SAVE 1
Save Setup Data to S001.
:SETup:RECall
Set
Description
Recalls Setup Data from internal memory to one of
100 slots.
Syntax
:SETup:RECall {<NR1>}
Parameter
<NR1>
S001 ~ S100