User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
143
Query example
:STATus:QUEStionable:EVENt?
> 1
Indicates an over voltage (OV) event has occurred.
:STATus:QUEStionable:NTRansition
Set
Query
Description
Determines whether a negative transition (NTR
10) in the Questionable Status Condition register
will set the corresponding event in the
Questionable Status Event register.
The mask values are the bit weights of the
Questionable Status NTR filters. See page 154 for
details.
Syntax
:STATus:QUEStionable:NTRansition <NR1>
Query Syntax
:STATus:QUEStionable:NTRansition?
Parameter/
Return Parameter
<NR1>
Condition
<NR1>
Condition
1
OV
512
UV
2
OC
1024
EXT
8
OP
2048
REV
16
OT
All other
bits
Not used
Example
:STATus:QUEStionable:NTRansition 11
Configures the OV, OC and OP bits (Bits 1, 2, 3) in the
Questionable Status Condition register to set the
corresponding bits in the Questionable Status Enable
register on a negative transition
Query example
:STATus:QUEStionable:NTRansition?
>11
OV, OC and OP bits are configured to NTR in the
Questionable Status NTR filter.