User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
144
:STATus:QUEStionable:PTRansition
Set
Query
Description
Determines whether a positive transition (PTR
01) in the Questionable Status Condition register
will set the corresponding event in the
Questionable Status Event register.
The mask values are the bit weights of the
Questionable Status PTR filters. See page 154 for
details.
Syntax
:STATus:QUEStionable:PTRansition <NR1>
Query Syntax
:STATus:QUEStionable:PTRansition?
Parameter/
Return Parameter
<NR1>
Condition
<NR1>
Condition
1
OV
512
UV
2
OC
1024
EXT
8
OP
2048
REV
16
OT
All other
bits
Not used
Example
:STATus:QUEStionable:PTRansition 11
Configures the OV, OC and OP bits (Bits 1, 2, 3) in the
Questionable Status Condition register to set the
corresponding bits in the Questionable Status Enable
register on a positive transition.
Query example
:STATus:QUEStionable:PTRansition?
>11
OV, OC and OP bits are configured to PTR in the
Questionable Status PTR filter.
:STATus:OPERation:CONDition?
Set
Query
Description
Returns the status of the Operation Status
Condition register. See page 155 for details.
Query Syntax
:STATus: OPERation:CONDition?
Return parameter
<NR1>
Condition
<NR1>
Condition
1
CAL
All other
bits
32
WTG