User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
149
The mask values are the bit weights of the
CSummary Status NTR filters. See page 153 for
details.
Syntax
:STATus:CSUMmary:NTRansition <NR1>
Query Syntax
:STATus:CSUMmary:NTRansition?
Parameter/
Return Parameter
<NR1>
Condition
<NR1>
Condition
1
CC
256
PRUN
2
CR
All other
bits
Not used
4
CV
8
CP
Example
:STATus:CSUMmary:NTRansition 3
Configures the CC and CR bits (Bits 1, 2) in the
CSUMmary Status Condition register to set the
corresponding bits in the CSUMmary Status Enable
register on a negative transition.
Query example
:STATus:CSUMmary:NTRansition?
>3
The CC and CR bits are configured to NTR in the
CSummary Status NTR filter.
:STATus:CSUMmary:PTRansition
Set
Query
Description
Determines whether a positive transition (PTR
01) in the CSUMmary Status Condition register
will set the corresponding event in the CSUMmary
Status Event register.
The mask values are the bit weights of the
CSummary Status PTR filters. See page 153 for
details.
Syntax
:STATus:CSUMmary:PTRansition <NR1>
Query Syntax
:STATus:CSUMmary:PTRansition?
Parameter/
Return Parameter
<NR1>
Condition
<NR1>
Condition
1
CC
256
PRUN
2
CR
All other
bits
Not used
4
CV
8
CP