User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
172
-420 Query UNTERMINATED
Indicates that a condition causing
an UNTERMINATED Query
error occurred.
-430 Query DEADLOCKED
Indicates that a condition causing
an DEADLOCKED Query error
occurred.
-440 Query UNTERMINATED after
indefinite response
Indicates that a query was
received in the same program
message after a query requesting
an indefinite response was
executed
Power On Event Commands
-500 Power on
The instrument has detected an
off to on transition in its power
supply.
User Request Event
-600 User request
The instrument has detected the
activation of a user request local
control.
Request Control Event
-700 Request control
The instrument requested to
become the active IEEE 488.1
controller-in-charge.
Operation Complete Event
-800 Operation complete
The instrument has completed all
selected pending operations in
accordance with the IEEE 488.2
synchronization protocol.