User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
30
*SAV
Set
Description
The Save Instrument State command saves the
instrument settings to one of the memory setting
slots.
Syntax
*SAV <NR1>
Parameter
<NR1>
1~256
Memory number 1 to 256
Example
*SAV 20
Saves the current setting to memory 20.
*SRE
Set
Query
Description
Queries or sets the Service Request Enable register.
The Service Request Enable register determines
which events in the Status Byte register can set the
Master Summary bit (MSB) in the Status Byte
Register. Any bits that are set to 1 will cause the
MSS bit to be set.
Syntax
*SRE <NR1>
Query Syntax
*SRE?
Parameter/
Return parameter
<NR1> (bit weight)
Bit number / Description
1
0/Not used
2
1/ERR
4
2/ CSUM
8
3/ QUES
16
4/ MAV
32
5/ ESB
64
6/ RQS_MSS
128
7/ OPER
Note: Bit 1 and 2 cannot be set, however bit 1 (ERR)
can be returned.
Example
*SRE 8
Sets bit 3 of the Service Request Enable register.