User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
33
Trigger Commands
:ABORt .................................................................................. 33
:INPut[:STATe]:TRIGgered ............................................... 34
:INITiate[:IMMediate] .......................................................... 34
:INITiate:CONTinuous ....................................................... 34
:CURRent[:VA]:TRIGgered ................................................ 35
:RESistance[:VA]:TRIGgered ............................................. 35
Trigger States
Idle state
Trigger Wait
state
:INIT:CONT
PEL-3000
power on
Triggered
ON
OFF
*RST,
ABORt
:INITate[:IMMediate],
:INITiate:CONTinuous ON
*TRG,
manual trigger
:ABORt
Set
Description
Clears the trigger wait status and returns to the
idle state.
Query Syntax
:ABORt