User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
38
Query example
:INPut:SHORt?
>0
Indicates that the short function is off.
:INPut:MODE
Set
Query
Description
Selects the load function mode.
Syntax
:INPut:MODE{ LOAD|PROG|NSEQ|FSEQ }
Query Syntax
:INPut:MODE?
Parameter/
Return parameter
LOAD
Sets the load to generator
as a CC/CV/CP/CR load.
PROG
Sets the function mode to
program.
NSEQ
Sets the function mode to
Normal Sequence mode.
FSEQ
Sets the function mode to
Fast Sequence mode.
Example
:INPut:MODE PROG
Puts the load generator into Program mode.
Query example
:INPut:MODE?
>PROG
Indicates that the current function mode is Program.