User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
COMMNAND OVERVIEW
63
Query example
:STEP:CPH?
>CPH:0.01
Returns the step resolution (0.01W).
[:CONFigure]:STEP:CPM
Set
Query
Description
Configures the step resolution for CP Medium
Range. Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CPM {<NRf>[ W ] | MINimum |
MAXimum }
Query Syntax
[:CONFigure]:STEP:CPM?
Parameter
<NRf>[ W ]
Step resolution.
MINIMUM or MIN
Minimum step resolution
MAXIMUM or MAX
Maximum step resolution
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CPM 0.001
Sets the step resolution to 0.001W.
Query example
:STEP:CPM?
>CPM:0.001
Returns the step resolution (0.001W).
[:CONFigure]:STEP:CPL
Set
Query
Description
Configures the step resolution for CP Low Range.
Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CPL {<NRf>[ W ] | MINimum |
MAXimum }
Query Syntax
[:CONFigure]:STEP:CPL?
Parameter
<NRf>[ W ]
Step resolution.
MINIMUM or MIN
Minimum step resolution