User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMNAND OVERVIEW
- Command Syntax
- Command List
- Common Commands
- Trigger Commands
- Input State Commands
- Measurement Commands
- Configure Subsystem Commands
- Parallel Commands
- Step Resolution Commands
- External Control Commands
- Mode Subsystem Commands
- Current Subsystem Commands
- Resistance Subsystem Commands
- Voltage Subsystem Commands
- Power Subsystem Commands
- Function Commands
- Utility Commands
- File Commands
- SCPI Register Commands
- Status Registers
- Error Messages
PEL-3000 Programming Manual
64
MAXIMUM or MAX
Maximum step resolution
Return parameter
<ASCII string>
Returns the range and the
step resolution.
Example
:STEP:CPL 0.0001
Sets the step resolution to 0.0001W.
Query example
:STEP:CPL?
>CPM:0.0001
Returns the step resolution (0.0001W).
[:CONFigure]:STEP:CP
Set
Query
Description
Returns the step resolution for each CP Mode
range as a string.
Query Syntax
[:CONFigure]:STEP:CP?
Return parameter
<ASCII string>
Returns the CPH, CPM
and CPL step resolution
settings.
Query example
:STEP:CP?
> CPH:0.01, CPM:0.001, CPL:0.0001
Returns the CP mode step resolution for each range.