User manual

PSU Programming Manual
102
Return parameter
1
Returns 1 when all the outstanding
commands have completed.
*RCL
Set
Description
Recalls the contents stored in memory slot M1, M2
or M3.
Syntax
*RCL {<NR1>|MAX|MIN}
Parameter
<NR1>
0, 1, 2 (as memory M1 , M2, M3)
MIN
Recalls the M1 memory contents.
MAX
Recalls the M3 memory contents.
*RST
Set
Description
Performs a device reset. Configures the unit to a
known configuration (default settings). This
known configuration is independent of the usage
history.
Syntax
*RST
*SAV
Set
Description
Saves the settings into memory slot M1, M2 or M3.
Syntax
*SAV {<NR1>|MIN|MAX}
Return parameter
<NR1>
0, 1, 2 (as memory M1 , M2, M3)
MIN
Saves the M1 memory contents.
MAX
Saves the M3 memory contents.
*SRE
Set
Query
Description
Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax
Query Syntax
*SRE <NR1>
*SRE?