User manual
PSU Programming Manual
92
Example
SYST:COMM:GPIB:SELF:ADDR 15
Sets the GPIB address to 15.
:SYSTem:COMMunicate:LAN:IPADdress
Set
Query
Description
Sets or queries LAN IP address. Note: the setting
will only be valid after the power has been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:IPADdress <string>
:SYSTem:COMMunicate:LAN:IPADdress?
Parameter/Return
<string>
LAN IP address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:IPAD “172.16.5.111”
Sets the IP address to 172.16.5.111.
:SYSTem:COMMunicate:LAN:GATEway
Set
Query
Description
Sets or queries the Gateway address. Note: the
setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:GATEway <string>
:SYSTem:COMMunicate:LAN:GATEway?
Parameter/Return
<string>
Gateway address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:GATE “172.16.0.254”
Sets the LAN gateway to 172.16.0.254.