User manual

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUs19" bench PSU (adjustable voltage) 0 - 12.5 Vdc 0 - 120 A 1 x Ethernet, RS232, RS485, USB remo

100

PSU Programming Manual

:SYSTem:COMMunicate:LAN:DNS

Set

Query

Description

Sets or queries the DNS address. Note: the setting

will only be valid after the power has been cycled.

Syntax

Query Syntax

:SYSTem:COMMunicate:LAN:DNS <string>

:SYSTem:COMMunicate:LAN:DNS?

Parameter/Return

DNS in string format ( “mask”)

Applicable ASCII characters: 20H to 7EH

Example

SYST:COMM:LAN:DNS “172.16.1.252”

Sets the DNS to 172.16.1.252.

:SYSTem:COMMunicate:TCPip:CONTrol

Query

Description

Queries the socket port number.

Query Syntax

:SYSTem:COMMunicate:TCPip:CONTrol?

Return parameter

<NR1>

0000 ~ 9999

Example

SYST:COMM:TCP:CONT?

>2268

Returns the socket port number.

:SYSTem:COMMunicate:SERial:LANGuage[

:SELect]

Set

Query

Description

Sets or queries the communication protocol for the

serial port.

Syntax

Query Syntax

:SYSTem:COMMunicate:SERial:LANGuage[:SELect]

{"SCPI"|"LEGACY"}

:SYSTem:COMMunicate:SERial:LANGuage[:SELect]?

Parameter/Return

parameter

"SCPI"

Sets the communication protocol to SCPI.

"LEGACY"

Sets the communication protocol to legacy

mode. (Emulate TDK Genesys)

Example

SYST:COMM:SER:LANG?

>SCPI

Indicates that the communication protocol is set to SCPI.