User Manual

Sine/Square/Triangle Wave

SHIFT

Press the Shift key, then 3

(−40dB). The main output is

attenuated by −40dB, and the

−40dB display indicator in the

display turns On.

SFG-1013

Set Duty Cycle (Square Waveform)

The duty cycle setting is not available in sine/triangle waveform.

Enter duty

cycle

ADJ

DUTY

Pull out the Duty knob. Turn right

(left) to increase (decrease) the duty

cycle. The default is set at 50%.

Range

25% ~ 75%

Set Offset

Offset setting does not apply to TTL output (page25).

SFG can add or delete offset to the sine/square/triangle

waveform, thus changing the waveform vertical position.

Activate

offset

Pull the OFFSET knob to turn On

Offset setting.

Adjust offset

ADJ

OFFSET

Turn the knob right (higher position)

or left (lower position).

Range

−5V ~ +5V for 50Ω output load