Instruction Manual

`
TO CHECK FOR LEAKS
If you smell gas:( In the event of gas leakage found)
Turn off the gas supply at the gas cylinder valve.
Ensure the control valve is “OFF”.
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections are secure then
turn ON the gas.
Brush the soapy water onto the hose and all joints. If bubbles appear you have a leak, which must be rectified
before use. Retest after fixing the fault
Turn off the gas supply at the gas container after use
If leakage is detected again and cannot be rectified. Do not attempt to cure leakage but consult your gas dealer.
SERVICING
Your gas barbecue should be serviced annually by a competent registered person.