Installation Instructions Instruction Manual

33
WALK-ALONG MASTER CARRIER
2 nylon-tired shielded ball bearing wheel
assemblies with swivel hook and trim chain
pivot on steel connecting plate. Supplied
with 2 rubber bumpers. 1 pair recom-
mended for each walk-along curtain.
No. 617 - Zinc plated.
No. 617B - Black finish.
SINGLE CARRIER
Nylon-tired shielded ball bearing wheels
riveted to steel body with swivel hook and
trim chain. Nylatron glide strips reduce
friction and noise. Supplied with 2 rubber
bumpers.
No. 616 - Zinc plated.
No. 616B - Black finish.
DOUBLE SPINDLE
Formed steel housing contains two ball
bearing guides for operating line to follow
curve. Mount to inside of curve on double
end pulley section of track.
No. 618 - Zinc plated.
No. 618B - Black finish.
SINGLE SPINDLE
Formed steel housing contains one ball
bearing guide for operating line to follow
track curve. Mount to inside of curve on
single end pulley section of track.
No. 619 - Zinc plated.
No. 619B - Black finish.
TENSION FLOOR BLOCK
4" diameter Nylatron GS sheave with shielded
ball bearings. Spring in steel housing maintains
line tension.
No. 608 - Zinc plated.
No. 608B - Black finish.
SPLICE
Steel plates align and lock track sections
together. Track must be straight at joint. 1
pair pictured.
No. 607 - Zinc plated.
No. 607B - Black finish.
CLAMP HANGER
Formed steel brackets clamp to track.
Adjusts to any position. Suspend track
with welded chain or wire rope. 1 pair
pictured.
NO. 606 - Zinc plated.
NO. 606B - Black finish.
CEILING HANGER
Steel plate mounts flush to ceiling. Track
clamps to bracket with offset clips.
No. 611 - Zinc plated.
No. 611B - Black finish.
TRACK
6063-T5 extruded aluminum 1" wide x 3-
3/8" high, .187" thick. 20' stock lengths.
No. 610 - Mill finish.
No. 610B - Class 1 black anodized.
No. 607FX SPLICE
DRILL FIXTURE
Hardened tool steel drill fixture for field drilling
of track for 607 splices.
SINGLE END PULLEY
4" diameter Nylatron GS sheave with shielded
ball bearings. Steel housing clamps to track.
No. 604 - Zinc plated.
No. 604B - Black finish.
OVERLAP CLAMP
Formed steel clamps to align track at overlap.
1 pair pictured.
No. 605 - Zinc plated.
No. 605B - Black finish.
No. 604A BLACK
SINGLE END PULLEY
2-1/2" diameter steel sheave with precision
ball bearings. Steel housing clamps to track.
For one-way draw operation.
No. 604M BLACK
SINGLE END PULLEY
4" diameter Nylatron GSM sheave with sealed
precision ball bearings. Steel housing clamps
to track. For use with motorized tracks.
OPERATING CABLE
Black polyester jacket braided over 3/32"
galvanized aircraft cable. For use with
motorized tracks.
No. 615 - 3/16" diameter
No. 625 - 1/4" diameter
No. 614 OPERATING LINE
1/4" diameter black polyester braided over
solid aramid core for manual operation.
OUTSIDE IDLER
Formed steel housing contains one ball
bearing guide for operating line to follow
track curve. Mount to outside of curve on
single end pulley section of track.
No. 620 - Zinc plated.
No. 620B - Black finish.
&