Heart Rate Monitor (HRM-3200) User’s Manual H3 SYSTEM Co., Ltd.
USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
I. General Description This device is to measure heart rate and being composed of main body with sensing part, arm band, battery charger and an adaptor (Optional). The measurement principle is based on the optics. The amount of the reflected light compared to the acting light is measured at the sensing part. The change of the light reflectance is analyzed to calculate heart rate at the main body.
① Main body : The main body is central processing part composed of LCD display, ON / OFF button, measurement button, charging terminals and a built-in communication module. ⓐ charging terminal : Connect the inner battery to charging terminal by adaptor ⓑ LCD display : LCD screen that displays heart rate. ⓒ " "(On/Off) Button : power ON / OFF ⓓ " "(Start/Stop) Button : Measurement Start / Stop, Wireless (Bluetooth) Start / Stop Button ③ Arm band : Fixtures for holding main body and sensing part to arm.
2. Heart rate measurement (1) In order to start the heart rate measurement, press “ (Measurement Start)” button. * Measuring Notes The initial 10 seconds are needed to initialize the measurement, it is recommended during this first 10 seconds not to move your arms, (2) If the 10 seconds initialization is successful, the heart rate monitor displays your current heart rate at the LCD display.
5. Precautions during use (1) Wear the sensing part with care to avoid application of excessive force. (2) Remain stop during 10 to 20 seconds after pressing the “ (measurement Start)” button (3) Do not stare at the light of the sensing part since the LED light is harmful if you stare on. (4) This device was developed for purposes described in this manual and the manufacturer is not responsible for side effects caused by an improper purpose or improper use.