Certifications 2

4
Hacker Motor GmbH
Schinderstrassl 32
Tel.: [phone]
Fax.:[phone]-29
D-84030 Ergolding
Ref-Nr.: GRP20180226001
Do not flush with water or aqueous cleansing agents
Additional information: See Section 7 for information on safe handling.
7. HANDLING AND STORAGE
a. Handling:
Technical measures
Prevention of user exposure: Not necessary under normal use.
Prevention of fire and explosion: Not necessary under normal use.
Precaution for local exhaust, and prevention of coarse particulate: Not necessary under normal use.
Precaution for safe handling: Do not damage or remove the external tube.
Specific safe handling advice: Never throw out cells in a fire or expose to high temperatures. Do not soak cells in water or
seawater. Do not expose to strong oxidizers. Do not give a strong mechanical shock or fling. Never disassemble, modify or
deform. Do not connect the positive terminal to the negative terminal with electrically conductive material. In the case of
charging, use only dedicated charger or charge according to the conditions specified by our company.
b. Storage
Technical measures
Storage conditions (suitable, to be avoid): Avoid direct sunlight, high temperature, high humidity. Store In cool place
(temperature:-20~35 degree C, humidity: 45~85%).
Lithium content per Cell 18g, Lithium content Battery Per Battery 54g
Incompatible products: Conductive materials, water, seawater, strong oxidizers and strong acids.
Packing material (recommended, not suitable): Insulative and tearproof materials are recommended.
8. EXPOSURE CONTROLS/PERSON PROTECTION
Engineering controls: Investigate engineering techniques to reduce exposures use with adequate ventilation a recommended
personal protective equipment.
Eye/Face protection: Use good industrial practice to avoid eye contact, process of this product releases vapors or fumes
which may cause eye irritation. Where eye contact may be likely wear chemical goggles and have eye flushing equipment
available.
Skin protection: Minimize skin contamination by following good industrial hygiene practices Wearing protective gloves
is recommended Wash hands and contaminated skin thoroughly after handling.
Respiratory protection: Avoid breathing dust and processing vapors When adequate ventilation is not available wear a
NIOSH/MSHA respirator approved for protection against inorganic dusts.
Special clothing: Robber gloves.
Other: Quick-drench eye wash and safety shower.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Form: Prismatic
Color: Silver
Odor: Without