Manual

Con_troJ Panel
4. Auto=De
5. Bucket Full Hndicator
6. Power Failure Resume Function
7. Auto Airodry
8. Digital Humidity Display
Operation Guide
After you plug in the unit it wiJJperform a seJfdest.AHthe display lights will turn on for 3
seconds. The LEDdisplay wiJJread "88". Hfany display light fails to turn on you may need
service on the unit. After the 3 seconds self-testthe unit wiJJautomatically go to the stand
by mode. Now all lights will be off and you will have to turn on by pressingthe "POWER"
key_After pressing "POWER", LEDdisplays the humidity of the ambient ain LED will display
"LO" when humidity is lower than 30%, and it will display "H" when humidity is higher
than 90%.
Htisnormal for the surrounding air to become slightly warmer as the dehumidifier operates_
This warming effect further reduces the relative humidity of the surrounding ain
1. Automatl¢ Humldistat ControJ
This allows you to adjust the humidity of the air. You may set the humidity to 'Four
desired by pressing "<" and ">" key.
,<H Event,time the key is pressed, desired humidity changes as follows:
dry' low humidity cornfortable middle humidify high humidity
The indicator lights turn on step by step. It will stop when in the high humidity.
">" Everytime the key is pressed, desired humidity changes as follows:
high humidity middle humidity comfortable low humidity dry
The indicator lights turn on step by step. It wiJJstop when in the dry.
3