Operation Manual

ManualsBrandsHaier ManualsLED TVLET39C800

Operation

EN-17

6). Channel tuning will commence. This operation may

take up to 6 minutes. The display will show the

progress of the tuning and the number of channels

found.

7). If you want to skip the ATV tuning, press the MENU

button to interrupt the tuning half way. A pop-up screen

will be displayed, press the button to select YES to

confirm. You will then go straight to DTV tuning. You

may repeat the above step if you also want to skip the

DTV tuning. An installation reminder will appear the

next time you turn on the TV.

8). After tuning is complete, the channels are arranged

in a preset order. If you wish to skip channels, modify

the preset order or rename channels, select Programme

Edit under the channel menu.

2. 1 )DTV Manual Tuning (DVB-T)

All the channels including ATV, DTV and Radio

can be tuning by one time,if the Tune Type is

DTV+ATV .

All the stored channels will be disappear after

auto tuning .

After auto tuning , the channel will skip to

the first DTV channel.

2). Press the▼▲buttons to select DTV Manual Tuning

and then press the OK button.

4). Press the MENU button to return back to the

main menu.

5). Press the EXIT button to exit the menu.

2. 2 )DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the▼▲

buttons to select the CHANNEL menu and then

press the OK button.

3). The DTV Manual Tuning screen will pop up.

Press the◀▶buttons to select the desired UHF

channel and then press the OK button to

commence the search of that channel. When the

signal has been tuned, the picture and signal

strength will be displayed on the screen.

1). Press the MENU button and then press the

buttons to select the CHANNEL menu and then

press the OK button.

2). Press the buttons to select CADTV Manual

Tuning and then press the OK button.

3). The CADTV Manual Tuning screen will pop up.

Press the buttons to select(Frequency /Symbol

(ks/s/QAM Type QAM) press the OK button to

commence the search of that channel. When the

signal has been tuned, the picture and signal

strength will be displayed on the screen.

4). Press the MENU button to return back to the

main menu.

5). Press the EXIT button to exit the menu.

▼▲

Programme(s)

490000

NO SIGNAL

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning

Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information